fbpx
Tickerly Trading bot service logo

BLOG

Funding Rates Automation: Turn TradingView Alerts Into Orders

by

Funding rate automation means two jobs: a rule that decides when funding is worth acting on, and a connection that turns that decision into an order the moment it fires. The rule lives in your TradingView strategy or indicator. The connection is where Tickerly comes in: it takes your TradingView alerts and sends them to your exchange as orders, with no VPS and no code, so a funding condition is acted on within a fraction of a second of the alert firing.

This guide covers what funding rates are, how to compare them across venues, how to build the alert logic, and what to account for before you automate.

Tickerly
tickerly.net
Automate Funding Rate Trades
Turn TradingView strategy alerts into exchange orders, so your funding conditions can trigger trades without manual execution.

Try for free

Key Takeaways

  • A funding rate is a periodic payment between long and short holders of a perpetual futures contract. Positive means longs pay shorts; negative means shorts pay longs.
  • Venues settle at different intervals (1, 4 or 8 hours is typical), so convert every rate to an 8-hour equivalent before comparing.
  • The decision logic, including sizing and stops, belongs in your TradingView strategy. Tickerly routes the resulting alerts to your exchange.
  • Funding rates can flip, so automate the exit as carefully as the entry.
  • Tickerly offers a 30-day free trial, with plans from $19 per month.

Table of Contents

What a funding rate is and who pays whom

Perpetual futures have no expiry date, so something has to keep their price close to the spot price. That something is the funding rate. According to Binance’s official FAQ, funding is a periodic cash flow between long and short holders, sized by the gap between the perpetual and index prices. When the rate is positive, longs pay shorts. When it is negative, shorts pay longs. Binance states it charges no service fee on these payments.

TradingView’s funding-rate guide frames the same thing in market-structure terms: a positive rate reflects contango (futures above spot), a negative rate reflects backwardation (futures below spot). It also notes that funding data is used for risk management, hedging, entry timing and sentiment.

The formulas differ by venue. Binance’s documented formula adds an average premium index to a clamped interest component, with the interest component set by default at 0.03% per day (0.01% per 8-hour interval). Hyperliquid’s documentation says its funding is paid every hour, with the premium sampled every 5 seconds and averaged over the hour. Same concept, different clocks, which matters the moment you compare venues.

Comparing rates across exchanges

A raw rate is meaningless without its interval. A 0.01% payment every hour is not the same as 0.01% every 8 hours. Sharpe.ai’s tracker normalizes each venue to an 8-hour equivalent (rate × 8 ÷ interval hours) and annualizes it as APR (8-hour equivalent × 3 × 365). Use the same arithmetic in your own logic.

Venue interval Settlements per day Multiply the quoted rate by
1 hour 24 8
4 hours 6 2
8 hours 3 1

Worked example: a 0.005% rate on a 1-hour venue equals 0.04% on an 8-hour basis, or about 43.8% annualized (0.04% × 3 × 365). The same 0.005% on an 8-hour venue is 5.475% annualized. Identical headline, an eightfold difference in what you earn or pay.

For live numbers, CoinGlass’s USDT funding page shows real-time rates across major exchanges with settlement intervals, next settlement time and APR, and Athenum’s page lists the latest BTC and ETH settlements with an eight-hour equivalent and seven days of history. Rates move every settlement cycle, so treat any figure you read as a snapshot of its period, not a benchmark. As a snapshot, CMC.io’s settlement history showed Binance’s last BTC settlement at 0.0100% on 11/20/2026 and Bybit’s at 0.0043%.

One caution from the same tracker: a venue whose rate sits far from the rest often has thin open interest, so a fat spread may not be tradable at size. If you compare rates across venues, a short guide to exchange API rate limits also helps you plan how often your automation can act.

Comparing rates across exchanges

Turning funding conditions into TradingView alerts

TradingView supports funding-rate data, and Pine Script can watch it. The pattern is consistent:

  1. Define the condition. For example, funding above a threshold you choose, or a flip from positive to negative. A DataMaxi+ tutorial uses an absolute rate above 0.05% as its demo trigger and labels the direction “longs pay” or “shorts pay” along with the settlement interval.
  2. Decide the action. Open a short to collect funding, close a position before an unfavorable payment, or hedge. Position size, stops and risk rules are written into the strategy in TradingView.
  3. Create the alert. Use a strategy alert when the order logic lives in a strategy, or a study alert for an indicator (on Tickerly that is a directional alert with fixed values, since strategy placeholders only work on strategies). Our guide to strategy alerts vs study alerts explains which suits automation.
  4. Route the alert to your exchange. This is the step that otherwise needs a server you build and maintain.

TradingView’s guide also points to timing entries around upcoming unfavorable funding payments, a natural fit for a time-aware alert.

Routing the alert to a live order with Tickerly

Once the alert exists, Tickerly converts it into an order on your connected exchange. You connect the exchange through its API, attach your TradingView alerts, and the order goes out within a fraction of a second. There is no VPS to rent and no code to write.

What this takes off your hands:

  • Execution plumbing. Alerts become orders without you running a listener.
  • Many strategies at once. Level 2 runs up to 20 active strategies and Level 3 and up run unlimited strategies, with 100, 1,000 or 2,500 alerts a day depending on the plan, so you can run one funding strategy per venue or per asset.
  • Hedged setups. If your funding trade pairs a short perp with other exposure, hedge mode alerts show how to set the direction of each leg.

For derivatives specifically, the walkthrough on automating TradingView Bybit futures alerts shows a concrete exchange setup, and the exchange list shows which venues are supported. For the full path from alert to fill, see TradingView alerts to exchange. When you want to test, use the exchange’s demo account before going live.

The no-VPS point applies to direct exchange connections. If you use MetaTrader, Tickerly works through the Tickerly TV Connector EA in your own MetaTrader terminal, which has to stay running, so a VPS is the usual answer there.

Risks to build into the strategy

Funding automation is a carry idea, and carry has costs and failure modes. Account for them in the strategy logic:

  • Rates change. Kraken’s funding-carry documentation notes that a rate flip turns a position from collecting to paying, so the exit rule matters as much as the entry.
  • Hedge the direction. The same document sets a hard rule to hedge carry positions to avoid directional exposure, and to keep watching margin on the futures leg even when hedged. Liquidation on one leg can wreck the pairing.
  • Fees and slippage. Every entry and exit pays trading fees and may fill away from your price. A small spread can disappear once both legs are costed.
  • Settlement timing. Gate’s help center notes that settlement processing can take several seconds, so the actual settlement time can vary slightly from the listed one.
  • Human oversight. Kraken’s documentation goes further and requires human approval for entries and exits. You can choose how much discretion to keep: automation does not remove the need to review the strategy regularly.

Nothing here is a promise of results. Automation executes your rules consistently; the quality of the rules is yours.

Our perspective

Funding strategies are time-sensitive by nature. The payment settles on a clock, and the rate can move between your signal and your order. That is why we built Tickerly around one job: turning a TradingView alert into an exchange order within a fraction of a second, without a server for you to babysit.

We keep the division clear. Your Pine Script strategy holds the logic, including sizing and stops. Tickerly carries it out across the strategies and exchanges you connect, within your plan’s limits, so a funding rule on one venue and a hedge on another can run side by side.

If you are weighing a hand-built webhook listener against a managed connection, count the hours you would spend on uptime and exchange API changes. Those are hours not spent on the strategy itself.

Jay

Start automating your funding strategy

Tickerly plans start at $19 per month for Level 2, with Level 3 at $29 and Level 4 at $39 per month, and every plan begins with a 30-day free trial. Level 4 Ultra is available for heavier setups. Compare them on the plans page.

Tickerly

If you want the end-to-end walkthrough first, read how to automate trading on TradingView using Tickerly.

FAQ

Is a negative funding rate bullish?

A negative rate means shorts pay longs, and per TradingView’s guide it corresponds to backwardation, which usually shows up in bearish conditions. It describes positioning, not a forecast. Traders read it as one sentiment input among several.

How often are funding rates paid?

It depends on the venue. CoinGlass notes most exchanges use 8-hour, 4-hour or 1-hour intervals. Always check the contract’s interval before comparing rates.

Can I automate a funding-rate strategy from TradingView?

Yes. Build the condition in Pine Script, create an alert, and connect it to your exchange through Tickerly so the alert becomes an order. Sizing and stops stay in your TradingView strategy.

Where can I see current funding rates?

Live tables such as CoinGlass show rates, intervals and APR across exchanges. Rates update each settlement cycle, so check the live table rather than a published figure.

Sources

This article was produced with Al assistance and reviewed for accuracy. It is provided for general information only and is not professional or financial advice.

Tags :

Latest Post